motorcycle

motorcycle

A motorcycle or motorbike is a single-track, two-wheeled motor vehicle powered by an engine. Styles of motorcycles vary depending on the task for which they are designed, such as long distance travel, navigating congested urban traffic, cruising, sport and racing, or off-road conditions. In many parts of the world, motorcycles are among the least expensive and most widespread forms of motorised transportThe inspiration for arguably the first motorcycle was designed and built by the German inventors Gottlieb Daimler and Wilhelm Maybach in Bad Cannstatt (since 1905 a city district of Stuttgart) in 1885.[1] The first petroleum-powered vehicle, it was essentially a motorised bicycle, although the inventors called their invention the Reitwagen ("riding car"). However, if one counts two wheels with steam propulsion as being a motorcycle, then the first one may have been American. One such machine was demonstrated at fairs and circuses in the eastern U.S. in 1867, built by Sylvester Howard Roper of Roxbury, Massachusetts.[1]
In 1894, Hildebrand & Wolfmüller became the first motorcycle available for purchase.[2] In the early period of motorcycle history, many producers of bicycles adapted their designs to accommodate the new internal combustion engine. As the engines became more powerful, and designs outgrew the bicycle origins, the number of motorcycle producers increased.
An historic 1941 CrockerUntil the First World War, the largest motorcycle manufacturer in the world was Indian, producing over 20,000 bikes per year. By 1920, this honour went to Harley-Davidson, with their motorcycles being sold by dealers in 67 countries, until 1928 when DKW took over as the largest manufacturer.
After the Second World War, the BSA Group became the largest producer of motorcycles in the world, producing up to 75,000 bikes a year in the 1950s. The German company NSU Motorenwerke AG held the position of largest manufacturer from 1955 until the 1970s.
NSU Sportmax streamlined motorcycle, 250 cc class winner of the 1955 Grand Prix seasonIn the 1950s, streamlining began to play an increasing part in the development of racing motorcycles and held out the possibility of radical changes to motorcycle design. NSU and Moto-Guzzi were in the vanguard of this development both producing very radical designs well ahead of their time.[3] NSU produced the most advanced design, but due to the deaths of four NSU riders in the 1954–1956 seasons, they abandoned further development and quit Grand Prix racing.[4] Moto-Guzzi produced competitive race machines, and by 1957 nearly all the GP races were being won by streamlined machines.[citation needed]
From the 1960s through the 1990s, small two-stroke motorcycles were popular worldwide, partly as a result of East German Walter Kaaden's engine work in the 1950s.[5]
Today, the Japanese manufacturers, Honda, Kawasaki, Suzuki, and Yamaha dominate the motorcycle industry, although Harley-Davidson still maintains a high degree of popularity in the United States. Recent years have also seen a resurgence in the popularity of several other brands sold in the U.S. market, including BMW, KTM, Triumph, Aprilia, Moto-Guzzi and Ducati.
Outside of the USA, these brands have enjoyed continued and sustained success, although Triumph, for example, has been re-incarnated from its former self into a modern world-class manufacturer. In overall numbers, however, the Chinese currently manufacture and sell more motorcycles than any other country and exports are rising. The quality of these machines is asserted to be somewhat lower than their Japanese, European and American counterparts[citation needed].
Additionally, the small-capacity scooter is very popular through most of the world. The Piaggio group of Italy, for example, is one of the world's largest producers of two-wheeled vehicles. The scooter culture has, as yet, not been adopted widely in North AmericaMotorcycle construction is the engineering, manufacturing, and assembly of components and systems for a motorcycle which results in performance, cost and aesthetics desired by the designer. With some exceptions, construction of modern mass-produced motorcycles has standardised on a steel or aluminium frame, telescopic forks holding the front wheel, and disc brakes. A one- to eight-cylinder gasoline powered engine coupled to a manual, five- or six-speed sequential transmission drives the swingarm-mounted rear wheel by a chain, driveshaft or belt.
Motorcycle fuel economy benefits from the relatively small mass of the vehicle. This, of course, relates to how the motorcycle is used. One person on a small motorcycle travelling a small distance is generally very economical. However a large motorcycle generally has bad aerodynamics compared to a typical car, poor aerodynamics of exposed passengers and engines designed for goals other than fuel economy can work to reduce these benefits. Riding style has a large effect on fuel economy. Some riders report being able to double fuel economy by using low accelerations and lower speeds than usual, although this is the extreme case.
Fuel economy varies greatly with engine displacement and riding style ranging from a low of 29 mpg (US) (12 km/l/35 mpg imp) reported by a Honda VTR1000F rider,[6] to 107 mpg (US) (45 km/l/129 mpg imp) reported for the Verucci Nitro 50 cc Scooter.[7] A specially designed Matzu Matsuzawa Honda XL125 achieved 470 mpg (US) (200 km/l/560 mpg imp) "on real highways - in real conditionsFueling a motorcycle can be difficult in that many of todays fueling nozzles are designed specifically for automobile and truck fueling. Motorcycles frequently have smaller fuel tanks with capacities between 2 gallons and up to 6 gallons on some models.
Many motorcyclist can easily overflow or spill fuel during fueling because the filler necks are exposed and an inefficient seal is formed.
Additionally, many of todays fuel nozzles are equipped with automatic shut off sensors which tend to over respond and cause a constant clicking off effect when filling a motorcycle.
In the United States the EPA has mandated the use of "Vapor Recovery" nozzles which augment the problem of fueling in that these nozzles tend to have a black accordion-like covering on the outside of the nozzle. This requires the covering to be held back manually with one hand to override the auto shut-off system allowing for a constant uninterrupted flow of fuel into the tankMotorcycles must be leaned in order to turn. This lean can be induced by a method known as countersteering, in which the rider turns the handlebars in the direction opposite of the desired direction of turn. In other words, press forward on the handgrip in the desired direction—press right to go right, press left to go left. This concept is counter-intuitive and often very confusing to novices—and even to many experienced motorcyclists.[9]
Short wheelbase motorcycles, such as sport bikes, can generate enough torque at the rear wheel and enough stopping force at the front wheel to lift the other wheel off the pavement. These actions, if performed on purpose, are known as wheelies and stoppies respectively. If carried past the point of recovery the resulting upset is known as "looping" the vehicleA plastic or fibreglass shell, known as a "fairing", is placed over the frame on some models to shield the rider from the wind, aid in aerodynamics and protect engine components in an accident. Drag is the major factor that limits motorcycle speed, as it increases at the square of the velocity, with the resultant required power increasing with the cube of velocity. As evident in the streamlined appearance of new performance motorcycles, there is much aerodynamic technology included in the design. Since the 1958 FIM ban on motorcycle designs that cover the wheels or the rider, e.g., "dustbin" fairings, no major manufacturer has provided fairing to overcome the effect of the turbulence caused by the spinning front wheel, which prevents the motorcycle from cutting a clean path through the air. "Dustbin" fairing can improve aerodynamic performance without substantially compromising the rider's ability to control the machine, if the fairing is designed and tested for the effects of side winds.
Screens, also called windshields or windscreens, can be built into a fairing or be attached to an otherwise unfaired bike. They are usually made from transparent high-impact acrylic plastic. They may be shaped specifically to direct air flow over or around the head of the rider even if they are much shorter than the seated rider.
An example of a fairing on a Honda CBR1000FIn the absence of a fairing or screen, a phenomenon known as the windsock effect occurs at speeds above 100 km/h (62 mph), where the rider becomes a major source of drag and is pushed back from the handlebars, tiring the rider.[citation needed] However, these motorcycles still effectively push their way through the atmosphere with brute force. A cabin cycle, which has a hull that wraps around the basic cycle frame, solved the problem of aerodynamics by isolating driver from outside air.
Modern fairings on touring and sport-touring motorcycles dramatically improve a rider's comfort and attention on long rides by reducing the effect of the wind and rain on the body. They also help keep a rider warm in cold weather or high wind chill conditions, reducing hypothermia. Heated hand grips, and even heated seats, also improve rider comfort in cold weather. Motorcycles from a number of manufacturers now have electric screens, introduced on the 1986 BMW K100LT, which raise and lower the screen with the push of a button to the optimum height for conditions.
Craven's Golden Arrow panniersSaddlebags or panniers Saddlebags or panniers mount on either side of the rear wheel behind the saddle to carry parts, tools, and/or travel gear. They can be made of fiberglass, ABS, leather, Cordura, or other appropriate sturdy material. They are normally standard items on touring motorcycles, but are usually optional on other types of motorcycles. They can be model-specific and available from a motorcycle's manufacturer, or after-market and designed to fit on numerous models.
As motorcycles lack climate control or proper protection from the wind, some manufacturers offer heated seats or hand grips to relieve the discomfort of low temperatures experienced during night riding or the colder months. They can also be added on as after-market accessories and are powered by the bike's electrical system

http://www.enterbet.com

Online portal for motorcycle riders, owners, and racers. Find bike reviews, join a group ride, or shop for helmets, boots, clothes, and accessories. IncludesMotorcycle tests and
reviews for bikers and racers. Includes buyer's guide, motorbike trivia, new bike model previews, and user ratings of rides across the U.S
A motorcycle or motorbike is a single-track, two-wheeled motor vehicle powered by an engine. ... Yamaha dominate the motorcycle industry, although Harley

Labels: checkered, electronics, figurines, games, harley davidson, models, motorcycle, motorsport, race, racing cars, stock car racing, ticket, travel

# posted by pedro : 3:39 PM 0 comments

Previous Posts

motorcycle

Friday, December 5, 2008

motorcycle

Wednesday, May 21, 2008

motorcycle

About Me

Archives